EXTENDER II
Trail /Touring Rider
• 4" of
90 Degree Carbide on a 7/16" Bar
• 1-1/4" of Carbide Wear Pads
• Full Length Hard weld added
• Rear of Bar Cut off for Easy Unloading
EXTENDER III
Trail /Touring Rider
•
4" of 60 Degree Carbide on a 7/16" Bar
• 1-1/2" of
Carbide Wear Pads
• Full Length Hard weld added
• Rear of Bar Cut off for Easy Unloading
High Performance Trail Rider
• 6" of 60 Degree Carbide on a 1/2" Bar
• 1-1/2" Carbide Wear Pads Front & Back
• Full Length Hard weld is Added
• Rear of Bar Cut off for Easy Unloading
Aggressive Trail Rider/Racer
• 8" of 60 Degree Carbide on a 1/2" Bar
• 1-1/2" Carbide Wear Pads Front & Back
• Full Length Hard weld is Added
• Rear of Bar Cut off for Easy Unloading
Aggressive Trail Rider
• 5/8" Material with 10" of turning carbide
• Carbide wear pads throughout the entire bar for longer wear and life
• USE WITH OEM PLASTIC SKIS
The Dooly TM has two 7/16" Flat-top runners mounted on a plate for each ski. The four contact lines on the snow surface will help decrease darting of your sled as it makes its own groove in the trail.
When in a turn, only one of the Dooly TM bars will be in contact with the snow or ice. Therefore, a Dooly TM with 6" of carbide on both runners will have the same turning power as a single runner with 6" of turning carbide.
The Dooly TM is available in 4", 6", and 8" of 60 Degree turning carbide for Arctic Cat, Polaris, Ski Doo and Yamaha snowmobiles.
Each DOOLY TM is packaged individually.
Performance Dooly is 31% Lighter and More Aggressive - Woody’s new Slim Jim TM Dooly.
The original Dooly was designed to reduce the front skis jerking as they hunted for the track of the snowmobiles that had gone before. This reduction in front end darting allowed you to regain confidence in your riding abilities because you could trust your front end control traction.
Assertive riders need to be able to read traction as they maneuver through changing trail configurations and ground conditions. The new Slim Jim TM Dooly embodies the anti-dart and adds superb cornering control. The Slim Jim enhanced cornering capabilities allow you to take it to the edge of traction and feel comfortable enough to bring it there and back when and if you want to. That level of riding can only be achieved by those who are able to trust their traction.
The Slim Jim TM Dooly is available in 4", 6" and 8" of 60o turning carbide for Arctic Cat, Polaris, Ski-Doo and Yamaha snowmobiles through the Woody’s runner line.
